A SERVICE OF

logo

Problem Possible cause Remedy
The dishwasher stops
running shortly after
starting a programme,
the in operation control
light is flashing rapidly.
Before rectifying the prob
-
lem you must:
Switch the dishwasher off.
Water inlet fault.
The indicator light "In
-
let/Drain", seen when the
door is open, lights up
and flashes alternately.
Open the stopcock
fully.
Check the water inlet
filter and clean if nec
-
essary, see “Cleaning
the water inlet filter”.
The Waterproof system
has reacted.
Call the Miele Service
Department.
The in operation control
light does not come on
after starting a
programme.
The reflector panel was
not correctly fitted.
Re-fit the reflector panel.
See relevant section in the
Installation Booklet.
Problem solving guide
42