^ The recirculation grille must be
removed when the hood is used in
extraction mode.
^
Hang the cooker hood in position
using the adjustable brackets.
^
Position the vapour canopy with the
furniture door front fitted, and close it.
The movement of the vapour canopy
can be adjusted if necessary, for
instance where a heavy furniture door is
fitted. The adjusting screws are
accessed through openings on either
side of the appliance.
^
Remove both cover caps.
^
Using a cross-slotted screwdriver
adjust both sides evenly:
- turn clockwise to tighten the
mechanism,
- turn anti-clockwise to loosen the
mechanism
^
Then refit the cover caps.
Installation
20
