^
Bolt the flange firmly to the ceiling us
-
ing the four M6 nuts.
^
Shorten the power cable as much as
possible and attach it to the terminal
block inside the chimney. See "Elec-
trical data".
Before connecting the appliance
read the "Warning and Safety In-
structions" and "Electrical data" sec-
tions.
^
Finally, being careful not to scratch
the chimney, push the cover plate up
-
wards until the spring fixing clips
click into place. If installed correctly,
the cover should be secure and flush
against the ceiling.
^
Before using the appliance remove
the grease filter and remove the pro
-
tective foil from the filter frame. Re
-
turn filter.
Installation
30
