115
Controls in detail
Control system
Malfunction memory menu
Use the malfunction memory menu to scan
malfunction and warning messages that
may be stored in the system. What infor-
mation is shown in the display depends on
whether malfunctions have actually oc-
curred.
̈ Press button è or ÿ repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occurred, the mes-
sage in the display is:
NO MALFUNCTION
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1 Number of malfunctions
̈ Press button k or j.
The stored messages will now be dis-
played in order. See the “Practical
hints” section for malfunction and
warning messages (
୴ page 260).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the key in the
starter switch is turned to position 0 or re-
moved from the starter switch.
Warning! G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
୴ page 260).
i
The message memory will be cleared
when you turn the key in the starter
switch to position 1 or 2. You will then
only see high-priority messages in the
multifunction display (
୴ page 260).
S203 MY03_A.book Page 115 Tuesday, January 28, 2003 2:22 PM
