McCulloch Corporation M48 Manual

A SERVICE OF

next previous

AU

13

CUTTING HEIGHT CONTROL LEVER

Turn mower off before adjusting cutting height. The single point cut height control adjusts all four wheels

simultaneously. To operate, steady the mower by grasping the handle with one hand, pull the lever out-

wards from the mower with the other hand, and move it to the desired setting.

For heavy or very long grass it is recommended setting the mower cut height to #4 or more to avoid the

possibility of clogging. If clogging becomes persistent because of unfavourable conditions, try walking

slower, cutting a narrower strip or raising the cutting height further.

Fig. 7A

Fig. 7B