A SERVICE OF

logo

56 Control Panel Options
RX2 Reference Guide E-EQ-RX2RG-B
Scanner
Access: Start | Settings | Control Panel | Scanner
The scanner panels have limited effect on the RX2.
COM1 is connected to the RFID reader and parameters cannot be edited by the user.
COM3 is an external RS-232 serial port.
COM2 is not used.
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
Factory Default Settings
Main
Port 1 Disabled
Port 2 RFID Internal
Power Port 1 while asleep Disabled
Send key messages WEDGE Enabled
Keys
Left Scan
Right Enter
COM Ports (COM1)
Baud Rate 115200
Parity None
Stop Bits 1
Data Bits 8
Power on Pin 9 On
COM Ports (COM2 - 3)
Baud Rate 9600
Parity None
Stop Bits 1
Data Bits 8
Power on Pin 9 Off (N/A for COM 2)