External Power Supply, Optional
External Power Supply, Optional
Note: The LXE-approved AC Power Supply and Adapter Cable are only intended for use in a 25ºC (77ºF) maximum
ambient temperature environment.
In North America, this unit is intended for use with a UL Listed ITE power supply with output rated 12 – 80 VDC, minimum
15W. Outside North America, this unit is intended for use with an IEC certified ITE power supply with output rated 12 – 80
VDC, minimum 15W.
The external power supply may be connected to either a 120V, 60Hz supply or, outside North America, to a 230V, 50Hz
supply, using the appropriate detachable cordset. In all cases, connect to a properly grounded source of supply provided with
maximum 15 Amp overcurrent protection (10 Amp for 230V circuits).
1. AC Input Cable (US only)
2. DC Output Cable
3. To DC Output Cable (see above)
4. To VX3X
How To: Connect External Power Supply
1. Connect the detachable cordset provided by LXE (US only, all others must provide their own cable) to the external
power supply (IEC 320 connector).
2. Plug cordset into appropriate, grounded, electrical supply receptacle (AC mains).
3. Connect the DC Output Cable end to the corresponding connector on the Adapter Cable.
4. Connect the watertight connector end of the Adapter Cable to the VX3X Power Connector by aligning the connector
pins to the power connector; push down on the watertight connector and twist it to fasten securely.
5. Press the Power button on the front of the VX3X.
Note: The power button is located above the ESC key on the keypad. After power is connected, the Power button must
be pressed to turn the VX3X on.
E-EQ-VX3XDKRG-C-ARC [ 9 ] VX3X Cradle Reference Guide
