104
NOTE:
You can "navigate" to the POI by pressing
ENT while in the POI in-
formation screen.
Find Interstate Highway Exits
1. Press FIND|↓ to HIGHWAY EXITS|ENT.
Land Mode Find menu, right.
2. First select a highway by pressing ENT. There are two options: A.
You can spell out the highway in the top selection box. Press ↑ or ↓ to
change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press
ENT|ENT. B. Jump
down to the low selection list by pressing
ENT, then press ↓ or ↑ to se-
lect a highway from the list, then press
ENT.
Find Exit using the Highway Name.
3. Once you have selected a highway you can then select an exit by
pressing ↓ then pressing ↓ or ↑ until you find the exit, then press
ENT.
4. In the Exit information screen you have two choices. A. Press
ENT to
navigate or "go to" the exit. B. Press →|
ENT to find the exit on the map.
