START OPTIONS
END OPTIONS
SET
SETUP
IR PORT
CC Stick Soft
WAVEFORM CONTROL TECHNOLOGY
Stick
WELD MODE
ARC CONTROL
I
I
ARC FORCE
(Soft)-10.0 to
(Crisp)+10.0
DESCRIPTION
Arc Force adjusts the short cir-
cuit current for a soft arc, or for
a forceful, driving arc. It helps
to prevent sticking and shorting
of organic
coated
electrodes,
par
-
ticularity globular transfer types
such as stainless and low
hydrogen. Arc Force is espe-
cially effective for root pass on
pipe with stainless electrode
and helps to minimize spatter
for certain electrodes and pro-
cedure as with low hydrogen,
etc.
START TIME:
0 to 10 seconds
FUNCTION
If no remote control is installed,
this control sets the time for
the weld output to ramp up or
down from a preset Start cur-
rent to the preset Weld current.
Use the WFS/AMP knob to
adjust Start current while the
Start Options LED is displayed.
No arc ending options are active for
SMAW
(Stick) welding modes.
PROCESS
Stick Soft(7018)
Stick Crisp(6010)
MODE
1
2
CC STICK MODES
START OPTIONS
END OPTIONS
ARC CONTROL
