A SERVICE OF

logo

47
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
ADV (x6)
AHSX
ADV
ADV
ADV
ADV
SEC
SEC
Insert an End Plug (AHS) into each end of Entry Header Bar (AFE).
!TTACHTHE%NTRY(EADER"ARTOTHE%NTRY'ABLE!SSEMBLYANDSECUREWITHSIX1/4” x 1 1/8” Pan-Head Screws
(ADV). Set aside.
AHS
AHS
Note: Only use a hand screwdriver in this step.
Note: Only use a hand screwdriver in this step.
!
!
The indented, rectangular
hole faces downward, and
is closer to the right side
of the Entry Gable.
The fl at screw holes should
face away from the Entry
Gable.
The fl at screw holes should
face away from the Entry
Gable.
The indented, rectangular
hole faces downward, and
is closer to the right side
of the Entry Gable.
AFE
7
7.7
7.8