Before Operation - VCR part
Tuning in TV Stations Manually
In certain areas of the country broadcast signals
may be too weak for your VCR’s automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually in order for your VCR to store them.
11
Press i.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press OK.
22
Press i.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune (for example, PR 06).
33
Press OK.
Enter the channel number of station that you want
to tune with the numbered buttons or use 3 or 4
to find the required station.
44
Searching will stop when it locates a station.
If the station transmits PDC, the station name will
be added automatically.
Press 2 to select MFT.
Control the fine tuning of the station by pressing 3
or 4.
55
Press 2 to select STATION so that you may name
your TV station.
Press OK.
The TV station name list will appear.
66
Press D or E to select a station name from the list.
Press OK to select it.
77
You can change a TV station name manually rather
than using the “standard” names.
Press
G.
Press 3 or 4 to select letters and numbers for the
new station name.
Press 1 or 2 to move back and forth between
characters.
Press OK.
88
Press i, confirm the station placement.
Press i again.
Your new TV station has now been tuned into your VCR.
If you wish to manually tune other stations repeat
stages 1 - 8.
Dr.
