6 Press or repeatedly until the setting you
want to use is selected.
Note:
•
2-Up—Prints two copied documents on a
page.
• 4-Up—Prints four copied documents on a
page.
• Off—Prints one copied document on a
page.
7 Press .
8 Press Start.
9 If prompted, press 1 (for yes) if you have more
pages, or 2 (for no) if you have finished copying
the number of pages you want to print in Paper
Saver mode.
Faxing
Sending a fax
1 Make sure the MFP is on.
2 Load an original document face-up into the ADF
or face-down on the scanner glass.
Note: Do not load postcards, 4 x 6 cards,
small items, or thin media (such as
magazine clippings) into the ADF.
Place these items on the scanner
glass.
3 From the control panel, press Fax.
4 Enter a fax number, press Speed Dial 1, 2, 3, 4,
or 5, or press Phone Book to select a number.
5 Press Start.
6 If prompted, press 1 (for yes) if you have more
pages, or 2 (for no) if you have finished
scanning the entire document.
Printing
Printing a document
1 Load paper.
2 With a document open, click File Print.
3 Click Properties, Options, Setup, or
Preferences.
4 Adjust the settings.
5 Click OK.
6 Click OK or Print.
Canceling a job from the printer
control panel
If the job is formatting or already printing, press
Stop.
Maintaining the printer
Replacing the toner cartridge
1 Press the access button on the left side of the
MFP, and open the front cover.
2 To remove the toner cartridge:
a Press the button on the print cartridge
assembly.
b Remove the toner cartridge using the
handle.
3 Remove the toner cartridge from the packaging,
and gently shake four or five times to distribute
the toner.
4 Gently slide the toner cartridge in until it locks
into place.
5 Close the front cover.
