A SERVICE OF

logo

4026-0XX
2-6
User Error Message Table
When a user error message occurs the printer stops printing and
one or two operator panel LEDs are on solid or blinking until the
printer is powered off. Locate the printer’s LED Status in the
following table and take the indicated action.
User Error Message LED Status Action
Paper Jam Paper Jam on solid Open cover and clear
any paper jams.Close
the top cover. If the
error message is still
present, go to the
“Paper Feed Service
Check” on page 2-34.
Load Manual Paper/
Envelope
Load Paper blinks and
Press Button on solid
Load media into the
manual slot and push
the operator panel
buttontoresume
printing or do a front
panel reset by press-
ing and holding the
operator panel button
for more than three
seconds.
Load Paper/Load
Envelope
Load Paper on solid
andPressButtonon
solid
Load media in the
appropriate paper tray
and push the opera-
tor panel button to
resume printing or do
a front panel reset by
pressing and holding
the operator panel
button for more than
three seconds.
Top Cover Open Error on solid Close the top cover. If
the error LED remains
on solid and POST
does not continue, go
to the “Cover Inter-
lock Service Check”
on page 2-16