TP-141, TP-142 - Overview
Illuminates when receiving the correct input signal
Adjusts the output signal level
Adjusts the cable compensation equalization level
Degradation and VGA/XGA signal loss can result from
using long cables (due to stray capacitance),
sometimes leading to a total loss of sharpness in
high-resolution signals.
Use a screwdriver to carefully rotate the trimmer,
adjusting the appropriate level.
Illuminates when receiving power
XGA OUT 15-pin HD Connector
Connects to the XGA acceptor
AUDIO OUT ANALOG 3.5mm Mini
Jack
Connects to the analog audio acceptor
AUDIO OUT S/PDIF RCA
Connector
Connects to the digital audio acceptor
+12V DC connector for powering the unit
To set V SYNC to positive polarity, slide the switch
to the right; to set the V SYNC to negative polarity,
slide the switch to the left
By default, both switches are set to the left (for a
negative V SYNC and H SYNC polarity)
To set H SYNC to positive polarity, slide the switch
to the right; to set the H SYNC to negative polarity,
slide the switch to the left
To set for any video signal, such as HDTV, slide the
switch to VIDEO; to set for a computer graphics
signal, slide the switch to XGA
