10
KX Amplifier
Specification
Performance
MODEL KX200.4
RMS Power in Watts, All Channels Driven
@ 14.4V, 4Ω Stereo, <
1% THD+N 4 x 35
@ 2Ω Stereo, <
1% THD+N 4 x 50
@ 4Ω Mono, <
1% THD+N 2 x 100
@ 12.5V, 4Ω Stereo, 0.085% THD+N 4 x 25
@ 2Ω Stereo, 0.5% THD+N 4 x 40
@ 4Ω Mono, 0.5% THD+N 2 x 80
Length with EndKaps: 11.84”
(30.07cm)
Specifications of KX200.4
Height: 2.5 inches / 6.35 centimeters
Width: 10.125 inches / 25.7 centimeters
Frequency Response: 20Hz - 20kHz, +/- 0.5dB
Input Sensitivity: 170mV - 5V low level, 340mV -
10V high level
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Electronic Crossover: High Pass, Low Pass or Bypass,
Fixed @ 80Hz, 12dB/octave
KickBass Boost: Variable 0 to +12dB boost @ 40Hz
Model KX200.4
35 x 4 @ 4 ohms, 14.4Vdc, 1% THD,
CEA-2006 (Watts)
Signal to Noise Ratio -85
CEA-2006 (ref: 1W, A-weighted)
