Keys Fitness ET530D Manual

next previous

6 7

3. STEP 3 MUST BE COMPLETED BEFORE MOVING TO

STEP 4 IN ORDER FOR THE HANDLEBAR ASSEM-

BLY TO LINE UP CORRECTLY!

Assemble the Pedal Mount Tubes (9R, 9L) onto the Crank

(16). Rotate the Crank (16) on the left side to its highest posi-

tion, loosen the Bolt (11) from the top of the Crank (16), then

slide the left Pedal Mount Tube (9L) onto the left side of the

Crank (16) and attach with Bolts (11). Repeat this process on

the right side of the elliptical trainer.

4. Attach the Upper Handlebar (4L, 4R) to the Lower Handlebar

(5L, 5R) with four Carriage Bolts (82), four Nylock Nuts (81)

and four Arc Washers (80).