A SERVICE OF

logo

Open as PDF
next previous
8282 83
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
NOTE
•Eachoperationinthissectioncanbestartedfrom
themultifunctionmenu.
Youcanadjustthevarioussettingssuchas
audiobalanceorsubwooferlevel.
1
Touch [Menu] on any screen.
2
Touch [Audio].
Audio screen appears.
See the following section for each setting.
• Setting audio (P.82)
• Controlling audio (P.84)
• Controlling equalizer (P.85)
• Performing zone control (P.86)
Setting Audio
1
Touch [Audio SETUP].
Speaker Select screen appears.
• Set up speakers (P.82)
Speaker setup
Youcanselectaspeakertypeanditssizeto
getthebestsoundeffects.
Whenthespeakertypeandsizeareset,
thespeakercrossovernetworkisset
automatically.
1
Touch the speaker you wish to adjust
and set each item as follows.
Subwoofer
Selectifyouareusingasubwoofer.
X’over
Displaysthespeakercrossoversetupscreen.
Youcanadjustthecrossoversetupthatwasset
automaticallywhenyouselectedthespeaker
type.
Fordetails,seeCrossover network setup
(P.83)
2
Select a speaker size using [2] and
[3]. The speaker size is different
depending on the speaker type and
the unit.
Front
Standard,Wide,Middle,Narrow
Controlling Audio
Crossover network setup
Youcansetacrossoverfrequencyof
speakers.
1
Touch the speaker to set the crossover
in the Speaker Select screen.
2
Touch [X’over].
X’over screen appears.
3
Set each item as follows.
Phase*
Setsthephaseofsubwooferoutput.
Thephaseisreversed180degreeswhensetto
“Reverse”.
HPF FREQ
HighPassFilteradjustment.(Whenfrontorrear
speakerisselectedonSpeakerSelectscreen)
LPF FREQ
LowPassFilteradjustment.(Whensubwoofer
isselectedonSpeakerSelectscreen)
*Thisfunctionisavailableinthespecific
situation.
Onlywhen“Subwoofer”issetto“ON”in
“SpeakerSetup”and“LPFFREQ”issetto
otherthan“Through”.