A SERVICE OF

logo

13
7. Remove the bracket from the other side of the blower motor,
rotate 180° and secure with 4 locknuts.
8. Position 2 wood spacers and mount them to the floor.
9. Mount blower motor to wood spacers using 4 - #8 x ¾" hex
head screws provided.
NOTE: Vent system will be connected after range has been
moved into it’s final location. “See Connect Range to
Downdraft System” section.
10. Go to the “Electrical Connection” section.
Top View
A.2" x 4" (5.0 x 10.2 cm) wood spacers
B.2
⁷⁄₉
" (7.3 cm) from back wall to edge of wood spacer
C.8¾" (22.2 cm)
D.2
⁵⁄₁₆
" (5.8 cm) centerline of opening to wood spacer
A
B
C
D
D
Top View
A.Wood spacers
B.Mounting bracket
C.Blower
A
B
C