A SERVICE OF

logo

6-3
Troubleshooting (continued)
Failure Codes
Type 1
This is showing a TYPE 1 failure code…. Only one burner affected. In this case Burner (coil)
sensor is not working. Only the left rear burner is affected. All other burners can be used.
Type 2 failure codes– come from the control board, there could be some exceptions. This
failure affects both burners associated with that power control board. Customer can use the
burners on the other power control board.
Type 2
Type 3
Type 3 failure codes come from the user interface. This failure disables the entire cooktop, all
burners are switched off by the user interface.
Failure/Error Code Types
There are 3 types of failures associated with the cooktop. The description of these failures and
the impact they will have on the rest of the cooktop are listed in the following: