117
Setup Menu
Listening Mode Setup
—Continued
a. Re-EQ/Academy
This option allows you to configure whether the Re-EQ
or Academy effect is applied or not in the
IntegraRESEARCH original listening mode. Use these
effects when you do not want to overemphasize the
treble sound.
Off (Default):
The effects are not applied.
Re-EQ On:
Adjusts the soundtrack in which the treble
is overemphasized, so that the sound is optimized for
home theater.
Academy On:
Lowers the treble level and filters the
noise when the source contains emphasized treble
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
b. Front Speaker
This option configures the front speakers to use when
playing the source. Select the speakers you want to use.
This setting can be made when the “(Speaker B) Front L/
R” is set to “Main A” in the Speaker Configuration sub-
menu.
A (Default):
Outputs the source from the front speakers
configured to “Speaker A.”
B:
Outputs the source from the front speakers
configured to “Speaker B.”
A+B:
Outputs the source from the front speakers
configured to “Speaker A” and “Speaker B.” Note that
this option is not available when the front speakers are
in Bi-amp configuration.
c. Center Speaker
This option configures the center speaker to use when
playing the source. Select the speaker you want to use.
This setting can be made when the “(Speaker B)
Center” is set to “Main A” in the Speaker Configuration
sub-menu.
A (Default):
Outputs the source from the center speaker
configured to “Speaker A.”
B:
Outputs the source from the center speaker
configured to “Speaker B.”
A+B:
Outputs the source from the center speakers
configured to “Speaker A” and “Speaker B.”
d. Surr L/R Sp
This option configures the surround speakers to use
when playing the source. Select the speakers you want
to use. This setting can be made when the “(Speaker B)
Surr L/R” is set to “Main A” in the Speaker
Configuration sub-menu.
A (Default):
Outputs the source from the surround
speakers configured to “Speaker A.”
B:
Outputs the source from the surround speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround speakers
configured to “Speaker A” and “Speaker B.”
e. Surr Bk Speaker
This option configures the surround back speakers to
use when playing the source. Select the speakers you
want to use. This setting can be made when the
“(Speaker B) Surr Back” is set to “Main A” in the
Speaker Configuration sub-menu. However, when the
“(Speaker A) Surr Back” is set to “Bi-Amp for Front” or
“Not Used,” this setting will not be displayed.
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker
Configuration sub-menu differ, the available options
will be “A” and “B.”
A (Default):
Outputs the source from the surround back
speakers configured to “Speaker A.”
B:
Outputs the source from the surround back speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround back
speakers configured to “Speaker A” and “Speaker B.”
f. Subwoofer
This option configures the subwoofer to use when
playing the source. Select the terminal to which the
subwoofer you want to use is connected. This setting
can be made when the “(Speaker A) Subwoofer” is set
to an option other than “Not Used” in the Speaker
Configuration sub-menu. However, when the “(Speaker
B) Subwoofer” is set to an option other than “Main A”
in the Speaker Configuration sub-menu, the available
options will be “A” or “Not Used.”
A (Default):
Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback.
This sub-menu allows you to configure the playback
options when you use the Dolby Virtual Speaker effect.
a. Mode (2ch or 3ch only)
This option allows you to configure the width of a virtual
sound image which is simulated using two or three
speakers while you use the Dolby Virtual Speaker effect.
Wide:
The breadth of the sound image is emphasized.
Reference (Default):
The general 5.1ch surround
sound is simulated.
Dolby Virtual Speaker Setup
Sub-menu
