A SERVICE OF

logo

14
Install a CFL bulb into each of the sockets.
When necessary, replace with bulbs of the
same type and wattage.
Lift the inner glass ush against the metal
plate and install the globe keeper. Thread the
pull chains through the holes in the nial cap.
Screw the nial onto the threaded rod.
Raise the outer glass to the light kit and
align the screw holes in the outer glass
with the screw holes in the posts of the
upper switch housing.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
switch housing screws could result in the light xture falling.
Light Kit (continued)
Finial
Finial
Cap
Globe
Keeper
Metal
Plate
Inner
Glass
Screw
Holes
www.HunterFanInternational.com
MB519-01 • 03/13/15 • © Hunter Fan Company