A SERVICE OF

logo

Open as PDF
next previous
7
45005-01•11/08/07•HunterFanCompany
3 • Assembling and Hanging the Fan (Low Profile Only)
You can assemble your fan for standard or angled mounting as shown
in steps 3-1 – 3-3 on the previous page. For low profile mounting
(ceilingslessthan8feethigh),seesteps3-6–3-10onthispage.
3-6. Removethescrewsfromthehangerballbracket.
3-7. Placethelowprolewasherfromthepartssackintothecanopy.
3-8. Placethecanopytrimringandcanopywithwasherontopofthe
fan assembly.
3-9. Alignthescrewholesinthewasherwiththeholesintheadapter.
Assemblesecurelywiththree#8-32x1/2”screws.
3-10.Raisethefanandplacethehookonthehangerbracketthrough
the round hole in the rim of the canopy.
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
Step 3-10
Step 3-7 (Detail)
Low Profile Washer
(NotActualSize)
Steps 3-8 – 3-9
Low Profile Washer
Canopy
TrimRing
Adapter
#8-32x1/2”Screw
Step 3-6