31
Application Files (APP-1,APP-2,APP-3)
Camera setting data can be stored in three application files. These enable optimizing the camera for specific scene and lighting
conditions, then storing the setting data in memory for quick recall at the appropriate time.
The application files have been set at the factory as follows.
APP-1: Standard type camera settings
APP-2: General purpose surveillance and TV conferencing
APP-3: Microscope settings. Particularly the masking is suitable for good color reproduction with a light
source of about 5000 K combined with a 9200 K color monitor.
Select the file according to the application. If the settings are changed for finer control, the setting data can be stored is each
file.
1. Items saved to application files
The following items can b saved to each file. The factory data are shown.
Menu item Application file Menu item Application file
APP-1 APP-2 APP-3 APP-1 APP-2 APP-3
MAIN MENU LEVEL
WHITE BAL MEM
3200K
MEM
3200K
MEM
3200K
R GAIN 0 0 0
GAIN NORMAL NORMAL NORMAL B GAIN 0 0 0
DTL 0 25 0 MASKING
DNR OFF OFF OFF R HUE 4 4 -8
SUB MENU 1 Y HUE -2 -2 -5
M.BLACK 0 0 0 G HUE -6 -6 -3
SHUTTER OFF OFF AES C HUE -4 -4 0
DTL FREQ STANDA
RD
STANDA
RD
HIGH B HUE 4 4 10
SUB MENU 2 M HUE 16 16 -14
DYNA
CHROMA
OFF ON OFF R SAT -1 -1 -4
CHROMA
GAIN
0 25 0 Y SAT -3 -3 5
AUTO
KNEE
ON ON ON G SAT 9 9 -1
MASKING ON ON ON C SAT 14 14 12
SHAD
MODE
COLOR COLOR LUMINAN
CE
B SAT 8 8 -16
LENS M SAT -6 -6 -6
LENS TYPE VIDEO VIDEO DC
IRIS MODE AUTO AUTO MANUAL
