Computer Setup
Maintenance and Service Guide 5–13
System Configuration menu (continued)
Built-In Device Options (continued) ■ Enable/disable a modem device (enabled by default).
■ Enable/disable the microphone (enabled by default).
■ Enable/disable the internal speakers (enabled by default).
Port Options (all are enabled by default)
✎
All port options are enabled by default.
■ Enable/disable the serial port.
■ Enable/disable the parallel port.
■ Enable/disable the flash media reader.
■ Enable/disable the USB port.
Ä
Disabling the USB port also disables MultiBay
devices and ExpressCard devices on the advanced
port replicator.
■ Enable/disable the 1394 port.
■ Enable/disable the ExpressCard slot.
■ Enable/disable the Smart Card slot.
■ Enable/disable the eSATA port
AMT Options ■ Enable/disable Firmware Verbosity.
■ Enable/disable AMT Setup Prompt (Ctrl-P).
■ Enable/disable USB Key Provisioning Support.
■ Enable/disable Unconfigure AMT on next boot.
■ Select Terminal Emulation Mode.
❐ ANSI
❐ VT100
■ Enable/disable Firmware Progress Event Support.
■ Enable/disable Initiate Intel CIRA.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
Select To do this
