A SERVICE OF

logo

10 Hewlett-Packard VPN Server Appliance SA3150 Regulatory Information
Closing the Cover
Perform the following steps to close the cover after you
have installed the internal components.
1.
Orient the cover with the recessed edge facing the front
panel of the server. The sides of the cover fit inside the
server chassis.
2.
Slide the cover forward until the recessed edge is all
the way under the front edge of the server front panel.
3.
Using a Phillips screwdriver, replace the screw
removed in the procedure, “Removing the Cover,” to
attach the server top cover securely.