HP CONFIDENTIAL
File Name: 339674-1.doc Last Saved On: 8/14/03 3:54 PM
60 HP KVM Server Console Switch User Guide
Press the Up or Down Arrow keys to move the cursor to the target server.
Then press the Alt + K keys to select the keyboard checkbox and/or the Alt
+ M keys to select the mouse checkbox. Repeat for additional servers.
2. Click OK to save the settings and return to the Setup dialog box.
3. Click X or press the Esc key to return to the Main dialog box.
4. From the Main dialog box, click the Commands dialog box ("Accessing the
Commands Dialog Box" on page 68), select Broadcast Enable to activate
broadcasting.
5. From the user station, enter the information and/or perform the mouse
movements you want to broadcast.
Activating the Broadcast Dialog Box
To activate or deactivate broadcasting, from the Commands dialog box
("Accessing the Commands Dialog Box" on page 68), select or deselect
Broadcast Enable.
Setting Up a Scan Pattern
In Scan mode ("Activating Scan Mode" on page 62), the HP KVM Server
Console Switch automatically scans port to port (server to server).You can select
up to 16 servers from a list of all servers attached to the HP KVM Server
Console Switch. You can display the list by either server name or EID number by
clicking the appropriate button. Selecting the checkbox beside each server to be
added to the scan list creates the scan list. The creation of a scan list does not
start Scan mode. You must enable Scan mode through the Scan Enable
checkbox on the Commands dialog box ("Accessing the Commands Dialog Box"
on page 68).
Accessing the Scan Dialog Box
From the Main dialog box ("Accessing the Main Dialog Box" on page 41), click
Setup>Scan. The Scan dialog box is displayed.
