ENWW The HP Jetdirect Control Panel Menu 221
RESET
SECURITY
Specify whether the current security settings
on the print server will be saved or reset to
factory defaults.
● NO (default): The current security
settings are maintained.
● YES: Security settings are reset to factory
defaults.
LINK SPEED (10/100Base-TX print servers only) Selects
the network link speed and communication
mode for the 10/100TX print server. For
proper communications, the Jetdirect
settings must match the network.
AUTO: (Default) The print server will
automatically configure itself to match the
network’s link speed and communication
mode. If it fails, 100TX HALF is set.
10T HALF: 10Mbps, half-duplex operation.
10T FULL: 10 Mbps, full-duplex operation.
100TX HALF: 100 Mbps, half-duplex
operation
100TX FULL: 100 Mbps, full-duplex
operation
Table B.1 HP Jetdirect Control Panel Menu (7 of 7)
Menu Item Options Description of settings
