INSTALLATION
Manual 0545 9 TowerTray
TM
for the HP LaserJet 4200 / 4300 / 4250 / 4350
Adapter
Detail view of data cabel positioning
With stacker
• Connect stacker and TowerTray with the provided data cable (see
picture): one end with the stacker and the other end with the
TowerTray port. The data communication between TowerTray and
printer takes place via stacker.
Note:
The adapter will not be needed in the configuration with stacker.
Caution:
Only move TowerTray to another place with drawers closed and
without printer on top to avoid hazard of toppling. Do not roll the
TowerTray with more than 4 trays on top – remove any surplus
trays. Drawers need to be secured against unintentional opening.
Be careful when crossing doorsteps or different flooring materials.
Be sure that the tray interlocking mechanism is applied.
Data-Cable position on unit with
stacker – arrows indicating
connection socket
