A SERVICE OF

logo

7. Keyboard (see Keyboard on page 47)
8. Top cover (see
Top cover on page 49)
9. USB board (see
USB board on page 56)
10. Display assembly (see
Display assembly on page 59)
11. Power connector (see
Power connector on page 58)
12. System board (see
System board on page 66)
13. Fan/heat sink assembly (see
Fan/heat sink assembly on page 70)
Remove the processor:
1. Turn the processor locking screw (1) one half-turn counterclockwise until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Component replacement procedures 75