Display assembly, non-touchscreen
Description Spare part number
Display assembly, FHD, non-touch 727461-001
Display assembly, HD, non-touch 727462-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
Service cover on page 30).
5. Remove the battery (see
Battery on page 32),
6. Remove the fan (see
Fan on page 45).
7. Remove the card reader board (see
Card reader board on page 44).
8. Remove the system board (see
System board on page 47).
Remove the display assembly:
1. Remove the 3 Phillips PM2.5×5.5 screws from the hinges (2 from the left, 1 from the right hinge)
(1).
2. Remove the Phillips PM2.5×3.5 screw from right hinge (2).
3. Rotate both hinges to the open position (3).
58 Chapter 4 Removal and replacement procedures
