A SERVICE OF

logo

7. Keyboard (see Keyboard on page 52)
8. Top cover (see
Top cover on page 55)
9. USB board (see
USB board on page 62)
10. Display assembly (see
Display assembly on page 64)
11. Power connector (see
Power connector on page 63)
12. System board (see
System board on page 71)
13. Heat sink assembly (see
Heat sink assembly on page 75)
Remove the processor:
1. Turn the processor locking screw (1) one half-turn counterclockwise until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
80 Chapter 4 Removal and replacement procedures