D
IMM installation guidelines:
All DIMMs must be PC2-5300 Fully Buffered DIMMs (DDR2-667) running at 533 MHz.
1.
Both DIMM slots in a memory bank must be populated.
2.
Banks must be populated in sequential alphabetic order, starting with bank A.
3.
Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1,
bank A.
4.
Multiple advanced memory protection (AMP) modes are supported, based on FBDIMM population and RBSU
selection. The server blade defaults to Advanced ECC
5.
HP ProLiant BL460c Server Blade (1P Model)
Standard Memory
Up to 2048-MB of PC2-5300, FBD DDR2-667 ECC DIMMs installed (2 x 1 GB ECC DIMMs) Memory is available with the
installation of optional PC2-5300, FBD DDR2-667 DIMM memory expansion kits.
Optional Memory
Up to 10246-MB of PC2-5300, FBD DDR2-667 ECC DIMMs. Memory is available with the installation of optional PC2-5300,
FBD DDR2-667 DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 1638-MB of DDR2 FBD-667 DIMMs, Memory is available with the installation of optional PC2-5300, FBD DDR2-667
DIMM memory expansion kits.
Memory
Slot
1 2 3 4 5 6 7 8
Standard
2048 MB
Empty Empty
1024 MB
Empty Empty
1024 MB
Empty Empty
Optional
1024 MB
512 MB
Empty Empty
512 MB
Empty Empty Empty Empty
Maximum
16384 MB
2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB
Following are memory options available from HP:
1GB FBD PC2-5300 2X512MB Kit
397409-B21
2GB FBD PC2-5300 2X1GB Kit
397411-B21
4GB FBD PC2-5300 2x2GB Kit
397413-B21
QuickSpecs
HP ProLiant BL460c Server Blade
Memory
DA - 12518 Worldwide QuickSpecs — Version 2 — 6/14/2006
Page 25
