48 Chapter1
Using Your Personal Workstation
Connecting SCSI Accessories
Connecting Internal SCSI Accessories
There are three internal SCSI connectors located on the Adaptec SCSI
card. See Figure 1-11. Your Personal Workstation comes with a LVD
SCSI cable for connecting internal LVD SCSI devices. To connect
internally Wide SE and Narrow SE SCSI devices, you will need to
purchase a cable for them.
NOTE While SE SCSI devices will work when attached to the LVD SCSI
connector, this will limit all devices to single-ended mode.
To learn how to install you internal SCSI device, read the chapter
“Opening Your Personal Workstation and Installing Accessories.” For
additional installation information, read the subsequent sections.
Figure 1-11 Adaptec SCSI Card Internal Connectors
Wide (68-pin) LVD SCSI Connector
Wide (68-pin) SE SCSI Connector
Connector
SE SCSI
Narrow (50-pin)
