Advanced Configuration and Management Guide
Displaying VLAN Information for Specific Ports
Use one of the following methods to display VLAN information for specific ports.
USING THE CLI
To display VLAN information for all the VLANs of which port 7/1 is a member, enter the following command:
HP9300(config)# show vlans e 7/1
Total PORT-VLAN entries: 3
Maximum PORT-VLAN entries: 8
legend: [S=Slot]
PORT-VLAN 100, Name [None], Priority level0, Spanning tree Off
Untagged Ports: (S7) 1 2 3 4
Tagged Ports: None
IP-subnet VLAN 207.95.11.0 255.255.255.0, Dynamic port disabled
Static ports: (S7) 1 2
Exclude ports: None
Dynamic ports: None
Syntax: show vlans [<vlan-id> | ethernet <portnum>]
The <vlan-id> parameter specifies a VLAN for which you want to display the configuration information.
Th
e ethernet <portnum> param
eter specifi
es a p
ort.
USING THE WEB MANAGEMENT INTERFACE
You cannot display port-specific VLAN information using the Web management interface.
16 - 58
