ENWW Configure Device menu 163
CLEARABLE WARNINGS *JOB
ON
Sets the amount of time that a clearable warning is
shown on the printer control panel display.
JOB: The clearable warning message appears until the
end of the job that generated the message.
ON: The clearable warning message appears until you
press S
ELECT ().
AUTO CONTINUE OFF
*ON
Determines how the printer reacts to errors. If the printer
is on a network, you probably want to turn
AUTO
CONTINUE
to ON.
ON: If an error occurs that prevents printing, the message
appears on the printer control panel display, and the
printer goes offline for 10 seconds before returning
online.
OFF: If an error occurs that prevents printing, the
message remains on the printer control panel display,
and the printer remains offline until you press S
ELECT
().
CARTRIDGE LOW STOP
*CONTINUE
Determines how the printer behaves if the print cartridge
is low. The ORDER CARTRIDGE message first appears when
about 15 percent of the toner remains in the print
cartridge at 5 percent coverage. (For the 12,000-page
cartridge in the LaserJet 4200 series, 15 percent is about
1,800 pages remaining. For the 18,000-page cartridge in
the LaserJet 4300 series, 15 percent is about
2,700 pages remaining.) Print quality is not guaranteed if
you print after receiving this message.
STOP: The printer pauses printing until you replace the
print cartridge or press S
ELECT ( ) before each job to
print it. The message appears until you replace the print
cartridge.
CONTINUE: The printer continues to print, and the
message appears until you replace the print cartridge.
For more information, see “Cartridge Low and Cartridge
Out conditions” on page 82.
CARTRIDGE OUT STOP
*CONTINUE
Determines how the printer reacts if the print cartridge is
empty.
STOP: The printer stops printing until you replace the
print cartridge.
CONTINUE: The printer continues to print, and the
REPLACE CARTRIDGE message appears until you replace
the print cartridge. HP does not guarantee print quality if
you select CONTINUE after a REPLACE CARTRIDGE
condition. Replace the print cartridge as soon as possible
to ensure print quality.
If the end of drum life is reached, the printer stops,
regardless of the CARTRIDGE OUT setting.
JAM RECOVERY OFF
ON
*AUTO
Determines how the printer behaves if a jam occurs.
OFF: The printer does not reprint pages following a jam.
Printing performance might be increased with this
setting.
ON: The printer automatically reprints pages after a jam is
cleared.
AUTO: The printer automatically selects the best mode for
printer jam recovery (usually
ON).
Item Values Explanation
