Operator Control
Menu
4-45
Printer Configuration
cType
get SYS:/admin/acc1.job acc1.job↵
get SYS:/admin/acc.pap acc.pap↵
get SYS:/admin/acc.sta acc.sta↵
» Note:
If multiple Job Accounting files are used, each of the
ACCx.JOB files should be copied. (x is the number of each
subsequent Job Accounting file.)
d Continue at step 4.
3 If your printer has a CrownNet interface, follow these steps:
a When prompted for a user id, enter root as the user name
and give the default password (pass).
b At the ftp> prompt, type bin↵ to use binary mode for the
download procedure.
cType
get SYS:/admin/acc1.job acc1.job↵
get SYS:/admin/acc.pap acc.pap↵
get SYS:/admin/acc.sta acc.sta↵
» Note:
If multiple Job Accounting files are used, each of the
ACCx.JOB files should be copied. (x is the number of each
subsequent Job Accounting file.)
4 Exit ftp.
Typ e quit↵
Processing Accounting Information on the Host
After the accounting files are stored on your host, you can create your
own filters (programs) based on your specific requirements using the
file and record descriptions shown earlier in this chapter.
