Installing Other Software
Installing Other
Software
This section provides information about the two kinds of printer
management software contained in the
CD-ROM
supplied with this
printer. The topics are:
l
PPMENU
Enables you to remotely control or configure your
printer’s features from your computer’s screen.
l
Mark Vision
™:
Monitors printer status (status is displayed with text
and graphics), displays optional printer’s features, and cooperates
with printer drivers. It also describes the printer control panel
function by which MarkVision™allows you to remotely operate
your printer from the printer control panel displayed on your
computer’s screen.
Note that PPMENU is available in Windows 3.1/3.11 or Windows
95 environments and MarkVisionr™ is available in Windows 95 or
Windows NT4.0 environments.
PPMENU
Generally, the printer driver controls the printer. You can also
control the printer using the remote setup utility program called
PPMENU, stored in the attached CD-ROM.
PPMENU allows you to easily change your printer’s features directly
from your computer. You use it to configure your printer to suit the
requirements of your computer, software, and documents to be
printed.
The parameters you can change using PPMENU affect page layout,
font, and printer control. If your software programs have printer
drivers, those printer drivers control the parameters for you.
Therefore, it may not be necessary to change the settings using
PPMENU.
PPMENU
needs to be installed only if you will print from DOS or
DOS based applications.
To install PPMENU, see the booklet “Quick Start” enclosed in the
CD-ROM envelope.
For more details and the latest modifications, refer to the
“ReadMe. txt” file concerning PPMENU.
1-26
User’s Manual
