OPERATING THE 4X1 DISPLAYPORT SWITCHER
12
Front Panel Buttons and LED Indicators
The front panel of the 4x1 DisplayPort Switcher has a set of four (4) LED
indicators, displaying which input (source) is being displayed. Each of these LED
indicators corresponds to one of the push-buttons on the front panel.
Switching sources using the front panel buttons
Example: Switch to input 3 using the front panel buttons:
1 Press button 3 on the front panel of the 4x1 DisplayPort Switcher.
2 The LED indicator for input 3 will glow bright blue on the front panel.
Switching sources using the IR Remote Control
Example: Switch to Input 1 using the IR Remote Control:
1 Press button 1 on the IR Remote Control Unit. The Activity Indicator on
the IR Remote Control Unit will glow yellow, indicating that a button was
pressed.
2 The LED indicator for input 1 will glow bright blue.
1
2
1
2
