A SERVICE OF

logo

Open as PDF
next previous
GPSMAP 5000 Series Owner’s Manual 37
confIGurInG the unIt
confIGurInG
the unIt
3. Touch On to turn the alarm on and then use the touch screen keyboard to specify alarm
information.
Setting Navigation Alarms
To set a navigation alarm from the Home screen, touch Congure > Alarms > Navigation.
Anchor Drag—sets an alarm to sound when you exceed a specied drift distance.
Arrival—sets an alarm to sound when you are within a specied distance or time from a destination
waypoint.
Off Course—sets an alarm to sound when you are off course by a specied distance.
Setting Engine Alarms
To set an engine fuel alarm from the Home screen, touch Congure > Alarms > Engine> Fuel.
Touch On or Off.
Setting System Alarms
To set a system alarm from the Home screen, touch Congure > Alarms > System.
Clock—sets an alarm using the system clock. The unit must be on for the clock alarm to work.
Battery—sets an alarm to sound when the battery reaches a user-determined low voltage.
GPS Accuracy
—sets an alarm to sound when the GPS location accuracy falls outside the user-
determined value.