SP - 2 E2366S01Q
1.11 User Setting Gain, Range, Alarm, Draft, Brilliance, Dimmer, Color, Auto
1.12 Auto Set Mode Gain, range and clutter will be automatically adjusted.
1.13 Alarm Shallow water (default 20 m), Bottom lost, Power drop
1.14 Logbook Display Depth, Internal clock, L/L*
1 hour at 5 sec Interval, 12 hours at 1 minute interval and 24
hours at 2 minutes interval
*: External navigational sensor required.
2 TRANSCEIVER CHARACTERISTICS (BUILT IN DISPLAY UNIT)
2.1 Transmit Frequency 50 kHz or 200 kHz
2.2 Output Power 600 Wrms
3 DIGITAL DEPTH INDICATOR
3.1 Display 4.5-inch monochrome LCD
3.2 Depth Indication **.* m (less than 100m)
**** m (100 m or more)
3.3 Power supply 24 VDC, 150mA
3.4 Coating color Panel: N3.0, Chassis: 2.5GY5/1.5
3.5 Waterproofing IPX5
4 TRANSDUCER TYPE AND BEAMWIDTH
4.1 50B-6B (50 kHz): 35°
4.2 200B-8B (200 kHz): 6°
5 INTERFACE
5.1 Serial Input Data IEC61162-1, current loop; 1 port
RMA: L/L, ground track speed, Track
RMC: L/L(GPS), ground track speed, Track, Time
GLL: L/L
GGA: L/L
VTG: Ground track speed,
Track (True/Magnetic selected on menu)
ZDA: Time
5.2 Serial Output Data IEC61162-1, output period: 1 sec.; 3 outputs/
1 port
SDDPT: Depth (m), Draft (m)
SDDBT: Depth (ft, m, fa) below transducer
SDDBS: Depth (ft, m, fa) below sea surface
5.3 Serial I/O Data RS-232C, 1 port
Output Depth, clock, L/L, ship’s speed, course
