9. DATA TRANSFER
9-4
Note: When receiving the waypoint data on PC, set all sentences other than
WPL off.
WAYPOINT LIST
SYM NAME TYPE
MODE
DST [nm}
BRG [M]
LATITUDE
LONGITUDE
ICON FIND LOCATE EDIT NEW
MODE DELETE SORT SEND RECEIVE
Waypoint list
7. Rotate the [ENTER] knob to choose SEND or RECEIVE at the bottom of the
screen.
SEND: Downloading all waypoints in the internal memory to external equipment.
RECEIVE: Uploading all waypoints to the internal memory from external
equipment.
8. Press the [ENTER] knob to execute.
When the transferring is completed, the message “User Points sending
(receiving completed.” appears.
9.2.2 Uploading/downloading routes data
You may upload/download routes as follows.
Note: All waypoints in a route can be transported with the route.
1. Connect the PC or another GP-7000/F to the equipment.
2. Choose INPUT/OUTPUT from the ADVANCED menu.
3. Choose NMEA 1 OUTPUT, NMEA 2 OUTPUT or RS232 3 OUTPUT
appropriately.
The sentence window appears.
