7
AC Adapter Jack: The AC/DC adapter input requires regulated 5 volt output
of at least 500 milliamperes.
This symbol indicates that the inner core of the plug of an AC adapter is
positive and that the outer part of the plug is negative. If the symbol on your
AC/DC adapter does not match the above symbol, conrm its compatibility
at its place of purchase.
Headphone Jack: The headphone jack is designed for 3.5 mm, 35 ohm
impedance stereo headphones. Caution: Monophonic headphones will not
work with this unit.
USB Port: Plug the cable into this port to connect your device to your PC.
MMC/SD Slot: Insert MMC/SD here. Slide the MMC/SD into the slot with the
contacts facing the back of the device. Push gently until it clicks into place.
To remove an MMC/SD from the slot, put your thumb on the MMC/SD and
push it in slightly. You hear a click and the MMC/SD pops out. Slide it out of
the slot.
Understanding Your Device
AC Adapter
Jack
USB Port
MMC/SD
Slot
Headphone
Jack
