A SERVICE OF

logo

WARNING
Before starting the Yerf Pup each time,
make sure the brake band is adjusted
tight on the brake drum. This can be
accomplished by tightening the nut
shown on the brake assembly with a
7/16” Wrench.
Brake is tight when Brake Band
cannot be moved side to side.
Note: Do Not over tighten.
7/16”
Wrench
Brake
Band
Nut
Brake
Band
Brake
Drum
Periodic maintenance requires cleaning
safety flag assembly.
For smooth operation of safety flag, clean
housing and flag tip after every 5 hours of
use. This can be accomplished by
cleaning flag tip with a rag and housing
with a cotton swab
Cotton
Swab
Flag
Tip
Housing
Nut
Safety Flag Maintenance
Brake Adjustment
MAINTENANCE INFORMATION