• Place a cap nut on a scrap block of wood.
• Place one end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the
straight axle.
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
• Slide a washer onto the straight axle.
Cap Nut
Straight Axle
Rear Wheel Indented
Side Down
Straight Axle
Washer
3
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
Hole
Hole
Frame
Straight Axle
Assembly
Hubcap Peg
Side Up
1
3
2
Bottom View
Scrap Block
of Wood
• Turn the frame on its side with the exposed end of
the straight axle up.
• Place the assembled rear wheel on the scrap block
of wood.
• Slide a washer onto the straight axle.
• Slide a rear wheel (indented side up) onto the end of
the straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Fit a cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel up to be sure the cap nut is securely
attached to the straight axle.
• Set the frame assembly aside.
Cap Nut
Rear Wheel
Indented Side Up
Assembled Rear
Wheel
Straight Axle
Washer
Hubcap Peg
Side Down
Frame
4
Bottom View
Scrap Block
of Wood
72639c-0920 9/28/01 1:41 PM Page 3
