Appendix B—I/O Port Pin Assignments B-2
Preparation
Preparation for a new DeskNote:
1. Use a DOS startup disk to start the DeskNote Computer.
2. Run FDISK utility from DOS to create a bootable partition.
After A: prompt, type fdisk. (A: fdisk) Choose “1”
hard disk as drive C:
(See DOS manual for the operation detail.)
3. Format hard disk. Follow the command “Format C:/S”
a bootable hard disk and a bootable floppy disk. (A: format C)
(C:/S copies system files to the formatted disk)
4. Copy the file [MSCDEX.EXE] from DOS disk to drive C:
5. Insert the disk of the CD-ROM driver. Type “Install”
prompt (A: install) See the driver manual for detail.
6. Restart the system
Installing Windows 95 (For Reference)
1. Start DOS.
2. Insert the Windows 95 CD-ROM.
3. Go to the “setup” directory
4. After the directory prompt, type “setup”, then press [Enter].
