The Font Cartridges
Selecting a font with SelecType
You can use the SelecType Level 1 FONT menu to select a font.
The font you choose remains valid for the entire document. When
you use SelecType to select fonts, you can select only one font per
document.
When the printer is in the HP emulation mode, the FONT option
displays the currently selected font source (RD, A, B, C, DL) and
the font number as shown below.
FONT
RD-
0
To select the font cartridge slot, select C with the font source
option (only the slot containing the font cartridges are displayed).
Then select the desired font number. See Chapter 3 for a complete
description of using SelecType.
Notes:
l Only fonts designed for the currently selected orientation
(portrait or landscape) appear on the SelecType display.
l If you are using the printer in HP emulation mode, the font
you want may not be available if it does not contain the
currently selected symbol set. For best results, select the
appropriate symbol set, with the SelecType SYMSET option,
and then choose the font. See Appendix C for more
information.
Appendix A A-7
