25
Programmed Playback
This system has a 60 track programmable memory that allows you to program up
60 tracks on 3 discs for playback in any desired order.
NOTE: YOU CANNOT PROGRAM THE PLAYER WHILE A DISC IS PLAYING.
YOU MUST PRESS THE STOP BUTTON TO STOP PLAYBACK BEFORE
BEGINNING THE PROGRAM STEPS BELOW.
1.) Load up to 3 discs in the player
as usual. Close the CD door and
wait until the display shows the
total tracks and playing time of
the first disc.
2.) Press the TIME-SET/MEMORY
button to enter the Program
mode. The display will show
track number “00” and “P – 01”
(program memory number 1), and the MEMORY indicator will be flashing.
3.) Select the disc number which
contains the first track to be
programmed by pressing the CD/
DISC SKIP button until the
desired DISC number appears in the display. Example: Disc 3
4.) Press the Skip or buttons
to select the first track to be
programmed.
Example: Track 7
CD
DISC
1
TOTAL
CD
DISC
1
CD
DISC
3
CD
DISC
3
MS3105_120503.p65 5/12/2003, 12:0325
