A SERVICE OF

logo

Aquapower 2000
2.2
Into the water!
·
Check if filter element cover is properly seated.
-
fit riser pipe
1
to pump
2
and push
firmly down.
-
attach fountain head.
-
attach diverter line.
·
Place pump into water.
Place pump on firm foundation (e. g.
bricks), to prevent priming of dirt parti-
cles.
Select location so that the fountain
head is above the water level.
B
Danger!
Electric potential.
Make sure the power cable plug does not get wet.
To prevent water running down the power cable from entering the outlet,
always lay out the power cable so that is raises to the power outlet.
·
Lay out power cable.
Water flow!
B
Danger!
Electric potential.
Unplug power cable before regulating the
water flow.
·
Turn flow regulator
3
on pump to adjust the
water bell height and intensity of diverter
stream.
·
Turn flow regulator
4
on riser pipeto adjust
diverter stream intensity.
·
Plug in power cable.
1
2
3
4
P0005 Seite 2 Freitag, 20. Februar 1998 11:55 Uhr