DOC. NO. 5956.677.00 P. 13 / 30
Electrolux
EFS - Dishwashing Systems Platform
Electrolux Professional
The PREWASH MODULE family contains the parameters that identify the prewash module characteristics
The PREWASH MODULE / PrE family parameters are described below:
A3.1.5 COMMUNICATION (COM)
The COMMUNICATION family parameters are selected and edited by using the buttons in the same way as
that described for the GENERIC FUNCTION family.
The COMMUNICATION family contains the parameters that identify the COMMUNICATION connection characteris-
tics.
The
COMMUNICATION
/ COM family parameters are described below:
If the parameter AC o is set to 0, management of detergent and rinse aid dosing is completely inhibi-
ted. Set the parameter to 0 to enable communication with the control PC, remembering to set the
parameter to 1 again for normal machine operation.
A3.1.6 APEX PARAMETERS
The Apex family contains the parameters that manage correct dosing of rinse aid and detergent.
The Apex parameter family is divided into 4 subfamilies: Start-up, Adjustment, Set-up and Test. Each subfa-
mily contains several parameters.
Press the confirm button to access the first subfamily of the Apex family (“C” -
(Figure 1)
Parame-
ter name
Display
visualiza-
tion
Family
Nr.
Parameter
Nr.
Parameter description Unit of
measure
Min Max Factory set-
ting [for WT44]
Tank
temper.
Prt
4 5 Tank temperature set point. °C / °F 5/41 90/
194
10/50
Autom.
drain del.
APd
4 11 Number of racks passing between two
automatic water changes. If this
parameter is set at zero the function is
disabled.
Racks 0 600 170
Parameter
name
Display
visualiza-
tion
Family
Nr.
Parameter
Nr.
Parameter description Unit of
measure
Min Max Factory set-
ting [for WT44]
Enable
Apex
Communic
ACo
5 2 Enables communication with Apex; to
enable communication with an external
control PC it must be set to 0; set to 1 to
re-enable communication with Apex.
-01 1
FAM
COM
