9
Part Names and Functions
Part Names and Functions
Rear Terminal
① SERVICE PORT
This jack is used to service the projector.
② COMPUTER IN 1 / S-VIDEO IN
/COMPONENT IN
Connect output signal from a computer,
RGB scart 21-pin video output, S-VIDEO
output, or component video output to this
terminal. (p.15-17)
W
hen the cable is of the longer variety, it
is advisable to use this terminal and not
COMPUTER IN 2 / MONITOR OUT.
④ AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this
jack. (p.15 - 17)
This
terminal outputs sound from AUDIO IN
terminal (⑤ or ⑦).
⑥ VIDEO IN
Connect the composite video output from
video equipment to VIDEO jack. (p.16)
⑦ AUDIO IN
Connect the audio output from video
equipment connected to
② or ⑥ to this
jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p.16)
⑤ COMPONENT / COMPUTER AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to
② to this jack. (p.15, 17)
③ COMPUTER IN 2 / MONITOR OUT
This terminal is switchable and can be used
for input from a computer or output to other
monitor. (p.15)
S
et up this terminal as either Computer
input or Monitor output as required.
This terminal only outputs the computer
RGB signal fed to COMPUTER IN 1/
S-VIDEO IN/COMPONENT IN terminal.
(p.15, 45)
① ② ③ ④ ⑤ ⑥
⑦
